Which is cheaper, the DF64 or the Profitec Pro T64?

The DF64 at $330 is more affordable than the Profitec Pro T64 at $699. With grinders, higher price generally correlates with better grind consistency, which directly impacts espresso quality.

How do the burrs compare between the DF64 and Profitec Pro T64?

The DF64 has 64mm Steel burrs while the Profitec Pro T64 has 64mm Steel burrs. Larger burrs generally grind faster with less heat. The burr material affects longevity and flavor profile.

Are both the DF64 and Profitec Pro T64 good for single dosing?

Yes, both grinders are designed for single-dose workflows. This means you weigh out each dose of beans, minimizing waste and ensuring maximum freshness. Both have low retention to support this workflow.

Should I buy the DF64 or the Profitec Pro T64 for espresso?

Both grinders can produce espresso-quality grinds. Choose the DF64 if you value single-dose workflow, infinite grind adjustment, uniform particle distribution. Choose the Profitec Pro T64 if you prefer single-dose workflow, infinite grind adjustment, uniform particle distribution. Remember, the grinder is arguably the most important piece of your espresso setup.

DF64 vs Profitec Pro T64

Side-by-side grinder comparison

Specification	DF64	Profitec Pro T64
Brand	Turin	Profitec
Price (MSRP)	$330	$699
Category	Flat Burr	Flat Burr
Burr Size	64 mm	64 mm
Burr Material	Steel	Steel
Burr Type	64mm flat	64mm flat
Grind Speed	1400 RPM	1400 RPM
Retention	0.5 g	0.5 g
Single Dose	Yes	Yes
Stepless	Yes	Yes
Hopper	50 g	50 g
Motor	250W	280W
Dimensions	110 x 170 x 380 mm	170 x 250 x 430 mm
Weight	8.5 kg (18.7 lbs)	9.5 kg (20.9 lbs)

Expert Analysis

The Profitec Pro T64 ($699) and DF64 ($330) both use 64mm flat burrs with single-dose capability. The T64 uses stepless adjustment with 0.5g retention at 9.5 kg. The DF64 is also stepless with 0.5g retention at 8.5 kg. Both accept standard 64mm aftermarket burrs. The T64 is Profitec's entry into the home grinding market with German engineering — premium materials, tight tolerances, and excellent finish. The DF64 uses cost-effective Chinese manufacturing that delivers impressive results. The T64's stock burrs are higher quality than the DF64's. The T64's anti-clumping and dosing system are more refined out of the box. The DF64 at half the price benefits from modifications (bellows, RDT, new burrs). With a $150 SSP burr upgrade, the DF64 matches the T64's grind quality at $480 total — still $220 less. Verdict: The DF64 is the value champion — match the T64's performance at a lower total cost with modifications. The T64 is for those who want premium fit-and-finish and zero tinkering at a higher price.

Price: The DF64 is priced at $330, which is $369 less than the Profitec Pro T64 at $699. That's a 53% price gap.

Build & Weight: The Profitec Pro T64 weighs 9.5 kg versus 8.5 kg for the DF64. A heavier grinder often indicates more robust build quality and better vibration dampening.

Our Verdict

The choice between the DF64 and the Profitec Pro T64 comes down to your priorities and budget. The DF64 is the more affordable option and offers great value. The Profitec Pro T64, while pricier, may justify the investment with superior grind quality and features. Both grinders are capable of producing excellent espresso grinds when properly dialed in.

Pros & Cons

DF64

Pros:

Designed for single dosing
Stepless grind adjustment
Large 64mm burrs
Flat burrs for uniform grind

Cons:

Learning curve for espresso dialing

Profitec Pro T64